User's Manual

User Manual Gallagher SmartReader BR Series
8
- If yes, end of procedure.
- If no, press the New Session button.
Note: A new session is always created when the SmartReader is
turned off, then on.
Scanning Electronic ID tags
1. Begin scanning Electronic ID tags.
2. Do you want to add the new tag reads to a new session?
- If yes, press the New Session button. Go to step 3. For further
details, see Buttons (p 4).
- If no, go to step 3.
3. Continue until you have read all Electronic ID tags.
Record limit
The SmartReader can store up to 20,000 15 digit Electronic ID numbers.
When the limit is reached the oldest recorded session will be removed to
allow new records to be added.
The SmartReader will display FULL, when the memory is full.
Finishing a scanning session
1. Turn off the SmartReader.
2. If you had external devices connected to the SmartReader disconnect
them.
3. On the SmartReader, unscrew the Amphenol connector locking nut and
disconnect the antenna cable.
4. On the SmartReader, replace the cap onto the Amphenol socket and
tighten to protect from debris.
5. Grasp the SmartReader on both sides and lift up until it clears the
mounting bracket.
6. Screw the Amphenol connector on the antenna cable into the Amphenol
socket on the Antenna Panel and tighten the locking nut.
Note: This helps keep the Amphenol connector free of dust and debris.
7. For information on downloading data from the SmartReader to your
computer, see MyScale Pro (p 32).