User's Manual

Page 16
3E3140 Gallagher T20 Terminal Installaon Note | Edion 16 | March 2016
Copyright © Gallagher Group Limited
13 Terminal variants feature summary The available funconality and supported card technologies for each variant are shown in the table below.
Terminal Variant Product
Codes
Cardax IV Funconality
Cardax IV Supported From:
HBUSFunconality HBUS Access
Supported From:
HBUS Alarms Management Supported From:
HBUS Fence Zone Management Supported From:
Card Variants Supported
T20 Mifare Terminal C300450
C300451
Access Control vHT1.0.69 Access Control
Alarms Management
vHT2.0.121 (vEL7.20) vHT3.0 (vEL7.30) vHT4.0 (vEL7.40) Mifare DESFire
EV1, Mifare Plus and Mifare Classic cards
T20 Mul Tech Terminal
C300460 C300461
Access Control vHT1.0.69 Access Control
Alarms Management
vHT2.0.121 (vEL7.20) vHT3.0 (vEL7.30) vHT4.0 (vEL7.40) Mifare DESFire
EV1, Mifare Plus, Mifare Classic and 125 KHz cards
T20 Alarms Terminal C300463
C300464
None None Alarms Management None vHT3.0 (vEL7.30) vHT4.0 (vEL7.40) None
T20 PIV Reader C305450
C305451 C305460 C305461
None None Access Control
Alarms Management
vHT2.01.02 (vEL7.21) vHT3.0 (vEL7.30) vHT4.0 (vEL7.40) PIV, PIV-I, CAC,
TWIC, Mifare DESFire EV1, Mifare Plus, Mifare Classic cards and 125 KHz cards (125 KHz are for C305460 only)
IMPORTANT:GallagherMulTechTerminals Using dual technology 125/Mifare cards with Gallagher Mul Tech terminals may cause both card technologies to be read, resulng in double card badges and unusual reader feedback. From Command Centre vEL7.00 a site can specify which technology a Mul Tech terminal should read from a dual technology card. Gallagher strongly recommends against using dual technology 125/Mifare cards with Gallagher Mul Tech terminals for sites running pre-Command Centre vEL7.00 soware. Note: To view the vHT soware version used by the terminal, press and hold the '#' key for 3 seconds.