User's Manual

Page 16
3E4291 Gallagher T20 Terminal Installaon Note | Edion 1 | August 2016
Copyright © Gallagher Group Limited
12 Terminal variants feature summary The available funconality and supported card technologies for each variant are shown in the table below.
Terminal Variant
Product Codes
Cardax IV Funconality
Cardax IV Supported From
HBUSFunconality HBUS Access
Supported From
HBUS Alarms Management Supported From
HBUS Fence Zone Management Supported From
Cards Supported
Bluetooth® Supported From
T20 Mifare Terminal
C300450 C300451
Access Control vHT1.0.69 Access Control
Alarms Management
vHT2.0.121 (vEL7.20)
vHT3.0 (vEL7.30)
vHT4.0 (vEL7.40)
Mifare DESFire EV1, Mifare Plus and Mifare Classic cards
None
T20 Mul Tech Terminal
C300460 C300461
Access Control vHT1.0.69 Access Control
Alarms Management
vHT2.0.121 (vEL7.20)
vHT3.0 (vEL7.30)
vHT4.0 (vEL7.40)
Mifare DESFire EV1, Mifare Plus, Mifare Classic and 125 KHz cards
vHT4.2//b44 (vEL7.60)
T20 Alarms Terminal
C300463 C300464
None None Alarms Management None vHT3.0
(vEL7.30)
vHT4.0 (vEL7.40)
None None
T20 PIV Reader
C305450 C305451 C305460 C305461
None None Access Control
Alarms Management
vHT2.01.02 (vEL7.21)
vHT3.0 (vEL7.30)
vHT4.0 (vEL7.40)
PIV, PIV-I, CAC, TWIC, Mifare DESFire EV1, Mifare Plus, Mifare Classic cards and 125 KHz cards (125 KHz are for C305460 and C305461 only)
vHT4.2//b44 (vEL7.60) for C305460 and C305461 only
IMPORTANT:GallagherMulTechTerminals Using dual technology 125/Mifare cards with Gallagher Mul Tech terminals may cause both card technologies to be read, resulng in double card badges and unusual reader feedback. From Command Centre vEL7.00 a site can specify which technology a Mul Tech terminal should read from a dual technology card. Gallagher strongly recommends against using dual technology 125/Mifare cards with Gallagher Mul Tech terminals for sites running pre-Command Centre vEL7.00 soware. Note: To view the vHT soware version used by the terminal, press and hold the '#' key for 3 seconds.