User's Manual

Page 4
3E4234 Gallagher T21 PIV Reader | Edion 1 | August 2016
Copyright © Gallagher Group Limited
1 Introducon
The Gallagher T21 PIV Reader is available in four variants. The variant you have purchased determines
the supported card technologies for the reader, refer to the topic "Reader variants feature summary"
below. The reader's contact slot reads PIV card data, for PIV PIN validaon.
The reader is compable with the Gallagher Command Centre soware vEL7.50 (or later). The reader
connects to a Gallagher Controller 6000 High Spec PIV (C305101). The reader sends informaon to the
Controller and acts upon informaon sent from the Controller. The reader itself does not make any
access decisions
The reader can be mounted on a rectangular 50 mm x 75 mm (2 in x 3 in) ush box, a BS 4662 Brish
Standard square ush box, or any solid at surface.
For instrucons on how to use this product, refer to the "3E3685 User Guide T2x Terminal" which can be
downloaded from here: hps://security-support.gallagher.com
Reader variants feature summary
The available funconality and supported card technologies for each variant are shown below.
Reader
Variant
Product
Codes
Cardax IV HBUSFunconality HBUS
Supported
From
Cards
Supported
Bluetooth®
Supported
From
T21 PIV
Reader
C305500
C305501
None Access Control
Alarms Management
Fence Zone Management
vHT4.2//b48
(vEL7.50)
PIV, PIV-I, CAC,
TWIC, Mifare
DESFire EV1,
Mifare Plus
and Mifare
Classic cards
None
T21 PIV
Reader
Mul
Tech
C305510
C305511
None Access Control
Alarms Management
Fence Zone Management
vHT4.2//b48
(vEL7.50)
PIV, PIV-I, CAC,
TWIC, Mifare
DESFire EV1,
Mifare Plus,
Mifare Classic
and 125 KHz
cards
vHT4.2//b48
(vEL7.60)
The following is not supported by the T21 PIV Reader:
• PIV PIN to PACS
• PIN is User Code (for PIV card access)
• Duress (for PIV card access)
Note: To view the vHT soware version used by the reader, press and hold the '#' key for 3 seconds.