User's Manual

Table Of Contents

Page 9

3E4290 Gallagher T12 Reader | Edion 1 | August 2016

Cardax IV Reader connecon:

Posive Red

Negave Black

HBUS Terminaon Orange

HBUS A Green

HBUS B Brown

CDXIV TX White

CDXIV RX Blue

Cardax IV Reader

5. Fit the facia assembly into the bezel by clipping the small lip, into the top of the bezel and holding

the top, press the boom of the facia assembly down into the bezel.

6. Insert the M3 Torx Post Security screw (using a T10 Torx Post Security screwdriver) through the

hole at the boom of the bezel to secure the facia assembly.

Note: The Torx Post Security screw needs only to be lightly ghtened.

Bezel

Fit screw to secure facia to bezel

Connecon

Reader tail

Building cable

Facia

7. Removal of the facia assembly is a simple reversal of these steps.

8. Congure the reader in Command Centre. If the reader is connected as an HBUS Reader, refer to

the topic "Conguring HBUS Devices" in the Command Centre Conguraon Client Online Help.

If the reader is connected as a Cardax IV Reader, refer to the topic "Creang Readers" in the

Command Centre Conguraon Client Online Help.