User's Manual

8 | Part Number: 3E2453 R1
Installation Note | Gallagher T10 Mifare Reader
Make the connections from the Gallagher T10 Mifare reader to either the
Cardax FT Controller 3000-4R or 3000-8R as shown:
PB1 and PA1... to... PB2 and PA2 (3000-4R)
PB4 and PA4 (3000-8R)
Cardax FT Controller 3000-4R or 3000-8R
Group
1 V OUT 2 0 V 1 DATA 0 2 DATA 1 3 OUT 1 4 OUT 2
PB
PA
Positive Red Negative Black Reserved Orange Reserved Green Reserved Brown CDXIV TX White CDXIV RX Blue
Cardax IV Reader
Positive Red Negative Black Reserved Orange Reserved Green Reserved Brown CDXIV TX White CDXIV RX Blue
Cardax IV Reader
Note: Within each group, you cannot mix Cardax IV readers with Wiegand
Readers. This is because connecting one Wiegand reader requires all four
pins on plug PB. For example, if you connect a Cardax IV reader to Port
1 of Group 1, Port 2 of Group 1 can only connect to another Cardax IV
reader.