User's Manual

Long press any switch button for 5 seconds to restore the factory settings.
The screen shots are only for reference. The interface may be different due to software update.
operation instruction attention
 Do not install the switch panel when the power is on (energy-saving lamps, incandescent
lamp, etc.).
 Prohibited under the condition of electric power on and touch the back of the high voltage
power supply parts.
 The load is not allowed to exceed the rated power.
 Do not use in a humid, potentially explosive environment.
 Do not use injection type of power, such as voltage regulators.
 non-professionals should not disassemble the switch.
 FCC Warning