Installation Guide
OPERATION INSTRUCTIONS
PLACEMENT OF FOOD
1. There should always be some space between
items inside for air circulation.
2. Food should be kept in sealed package to avoid
becoming dry or with odour.
3. Hot food should be cooled down before placing
into the appliance. Otherwise, interior temperature
and electronic consumption will increase.
4. Reduce the frequency of door opening can
efficiently low down the electronic consumption.
WARNING Do not use an y electronic equipment inside the appliance.
INSTRUCTION FOR USAGE
REFRIGERATOR CONTROL
The temperature of refrigerator can be controlled manually by the
display. However, the number shown on the display does not directly
represent the temperature. Instead, the larger the number is the
lower the interior temperature will be. Initially set the refrigerator
control on the middle setting (number 3). If you want to set the
refrigerator temperature to a colder temperature pressing the set
button until the state on 4 or
5 each time the set button
is pressed, the state increases
by 1. When the state is in the
highest state, press the button again and return to the first state.
FREEZER CONTROL
If the refrigerator’s lower temperature is needed,
please regulate the knob along the “COLDER”
direction contrarily, regulate the knob along the
“COLD” direction.
Note: Regulate the knob to set the freezer
temperature as you desire. Always wait 24 hours
after any adjustment to reach the desired temperature
ICE MAKER (on some models)
After turning on your refrigerator, the ice will start to be made
between 12and 24 hours.
The ice maker produces 3.5 lbs
ice per day, depending on the
temperature of the freezer, the
times in which the door opens,
and other using conditions
(amount of food in the freezer, etc).
In order to turn on/off the ice maker, press the power button for 2
seconds.
The ice maker will fill up (and start making ice) between 12 and 24
hours after the refrigerator is turned on. Throw away the first batch of
ice. Make sure that nothing interferes with the sensor. When the ice
reaches the sensor, the ice maker will stop to make ice immediately.
It’s normal that some ice gets stuck. If the ice is not used frequently,
the older cubes of ice will be opaque in color, smaller, and with a
strange flavor.
Thank you for purc has ing a G alanz product. P leas e read this manual c arefully for c orrec t usage and s afety,
and keep for future reference. For s ervice, s upport and warranty information, c all 800-562- 0738.
FPO
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
©2019 Galanz Americas Limited Company
Power Button
Sensor
10