Installation Manual

INSTALLATION REQUIREMENTS

INSTALL OVEN

WARNING

Excessive Weight Hazard

Use two (2) or more people to move and install

oven. Failure to do so can result in back or

other injury.

1. Using two (2) or more people, lift the oven partially into the cabinet

cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of the oven front frame when

pushing the oven into the cabinet. Do not push against the outside

edges.

2. Push the oven completely into the cabinet until the back surface of

the front frame touches the front wall of the cabinet. Center the

oven within the cabinet cutout.

NOTE: With the oven door open, you will see two (2) holes on each

side of the front frame of the oven door opening.

Holes

Seal Area of Oven

3. Drill 1/8” pilot holes, through the four (4) holes in the front frame

and into the front wall of the cabinet.

4. Using the four (4) screws (provided), install the oven to the cabinet.

Replace the oven racks.

5. Reconnect power to the oven.