Installation Manual

INSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTION

DIRECT WIRE

WARNING

Electric Shock Hazard

Disconnect power before servicing.

Use 8 gauge copper or 6 gauge aluminum wire.

Electrically ground range.

Failure to do so can result in death, fire or

electric shock.

Be sure your appliance is properly installed and

grounded by a qualified technician. Ask your dealer to

recommend a qualified technician or an authorized

repair service.

WARNING

Electric Shock Hazard

Grounding through the neutral conductor is

prohibited for new branch-circuit installations

(1996 NEC); mobile homes; and recreational

vehicles, or in an area where local codes

prohibit grounding through the neutral

conductor. For installations where grounding

through the neutral conductor is prohibited,

see the Ungrounded Neutral graphic.

Use grounding terminal or lead to ground unit.

Connect neutral terminal or lead to branch

circuit neutral in usual manner.

Failure to do so can result in death, fire or

electric shock.

3-WIRE CONNECTION (GROUNDED

NEUTRAL)

This appliance is manufactured with a green GROUND wire connected

to the oven chassis. After making sure that the power has been turned

off, connect the flexible conduit from the oven to the junction box using

a UL listed or CSA approved conduit connector. The Grounded Neutral

and Ungrounded Neutral Graphics on the following pages and the

instructions provided, present the most common way of connecting the

ovens. Your local codes and ordinances, of course, take precedence

over these instructions. Complete electrical connections according to

local codes and ordinances.