GainSpan GS2200M User Manual Confidential Page 1
GainSpan This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s license-exempt RSSs.
GainSpan Labeling GS2200MIE/MIZ will be labeled as below.
GainSpan Serial-to-Wi-Fi Commands for Regulatory Certification HW Version: GS2200M FW Version: FW 5.2.3.12 or later version. Commands for GS2000M o Continuous TX Power for TX100 command or TX99 command Step1: at+wrfteststart Figure.
GainSpan Step3: Set transmitter output in TX100% or TX99% duty cycle, as required. Adjust output power based on GCT (Gain Control Table) settings in the table below. GCT setting of TX Power 11b-1Mbps Ambient Temperature(°C) 2.7V 3.3V 3.6V -40 7 12 11 25 10 16 16 70 11 16 17 11g 6Mbps Ambient Temperature(°C) 2.7V 3.3V 3.6V -40 17 21 21 25 19 24 24 70 23 26 27 11g MCS0 Ambient Temperature(°C) 2.7V 3.3V 3.
GainSpan Figure.
GainSpan Figure.
GainSpan Figure.4 Figure.
GainSpan Test Equipment DUT: GS2200M Spectrum Analyzer: HP - 8563E PC/Laptop: OS Processor Ram Port Terminal Windows XP/ Windows 7 Intel i5 CPU @2.4GHz > 512k Bytes Serial Com Port/ USB to Serial Com Port Tera Term/ Hyper Terminal with rate 9600 Bps Table.1 The setting of Hyper Terminal Step 1: Go to Device Manager to check the number of Com Port Figure.
GainSpan Step2: Set up Com port in Hyper Terminal Figure.7 Step3: Set up the rate 9600Bps Figure.
