User's Manual

GS2011MIPS
Step 6 : Now any legal command can be keyed in and if UTF-8 reply ok, the command is implemented
successful like below figure.
Figure 3
802.11b, Transmitter command:
Transmitted Tx at 11Mbps
Command
Action
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 1, 11Mbps
at+wtx100test=6,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 6, 11Mbps
at+wtx100test=11,0,11,0,0,0,0,1,1,0,0,1,3,1
Continuous Tx Channel 11, 11Mbps
At+rfset
Transmitter off
Transmitted Tx at 5.5Mbps
at+wrfteststart
Start up internal Power Amplifier
at+wtx100test=1,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 1, 5.5Mbps
at+wtx100test=6,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 6, 5.5Mbps
at+wtx100test=11,0,14,0,0,0,0,1,1,0,0,1,2,1
Continuous Tx Channel 11, 5.5Mbps
At+rfset
Transmitter off
Transmitted Tx at 2Mbps
User Manual Sheet of 18 July. 03, 2014
Proprietary Information and Specifications are Subject to Change
3