INSTRUCTIONS BOOKLET US/CANADA

30
English
Meaning of the Error Codes
The list below reports the warning icons that the display can show, their
meanings and how to solve the problem. If the indicated solutions are
ine ective because the display keeps on showing the error code icon
and the machine does not function correctly, please contact the Gaggia
customer service.
In case other error codes are shown, please take the machine to an au-
thorized after-sale service centre.
The contacts are listed in the guarantee brochure or on the www.gaggia.
com and www.gaggia.it websites.
Error
codes
Problem Cause Possible solution
01 The co ee grinder is
clogged.
The co ee outlet duct is
clogged.
Switch o the machine using the main power
button and remove the brew group. Clean
the co ee outlet duct thoroughly using the
handle of the measuring scoop or the handle
of a spoon. Switch on the appliance again.
03 - 04 A problem occurred in the
brew group.
The brew group is dirty
or it is not well lubri-
cated.
Switch o the machine using the main power
button. Remove the brew group and clean it
thoroughly. (refer to the “Cleaning the Brew
Group” chapter).
The brew group is not
correctly positioned.
Switch o the machine using the main power
button. Remove the brew group and reinsert
it again. Ensure the brew group is in its right
position before inserting it. Refer to the
“Reinserting the Brew Group” chapter.
05 A problem occurred in the
water circuit.
There is air in the water
circuit.
Remove and reinsert the tank in the machine
twice. Ensure to insert the tank correctly in
the machine. Check that space of the water
tank is clean.
If you use a “INTENZA+”  lter: pull out the
 lter from the water tank and shake it to
remove all air from the  lter. Reinsert the
"INTENZA+"  lter into the water tank.
14 The machine is overheated. There may be multiple
causes.
Switch o the machine and switch it on
again after 30 minutes. Perform this opera-
tion 2 or 3 times.