INSTRUCTIONS BOOKLET US/CANADA

English

Dispensing Milk-based Beverages

1 Pull out the milk dispensing spout to the right up to the icon.

Note: if the carafe dispensing spout has not been pulled all the way out, milk

may not be properly frothed.

2 Place a cup under the open milk dispensing spout.

3 Choose your milk-based beverage.

- Press the CAPPUCCINO or the LATTE MACCHIATO buttons just once

to prepare immediately one of these two milk-based beverages.

- Press the MENU button, select DRINKS, con rm with OK, scroll until

selecting MILK FROTH and press the OK button again in order to

dispense frothed milk.

The machine will remind you to install the milk carafe and open the milk

dispensing spout.

3 The machine pours in the cup or in the tumbler a preset amount of milk

froth  rst and then a preset amount of co ee.

Note: press the OK button to interrupt milk or co ee dispensing.

4 After the preparation of co ee and milk-based beverages, the display re-

quests you whether you wish to perform a quick clean of the milk carafe.

This operation can be enabled within 10 seconds (see “Quick Clean of the

Carafe”). This operation can be performed with the carafe containing milk.

It is recommended to perform the quick clean at least once a day. Press

the OK button to con rm or the ESC button to perform the quick clean

later.

Removing the Milk Carafe

Rotate the carafe upwards until it is naturally released from the insert in the

drip tray. Then, remove the carafe.