INSTRUCTIONS BOOKLET US/CANADA

13
English
Place a container under the co ee dispensing spout and under the water
dispensing spout.
The standby button will blink. Press the button to switch on the machine.
Press the OK button to start the circuit priming.
The machine indicates to install the water dispensing spout.
Press the OK button to con rm.
The machine will start dispensing hot water.
The bar under the icon shows the operation progress. When the operation is
complete, the machine stops dispensing automatically and starts warming up.
Measuring the water hardness
Use the supplied stripe for measuring the water hardness.
1 Immerse the stripe provided into running water for 1 second.
2 Remove the stripe from water and wait for 1 minute.
3 Count the number of small squares which have turned red and compare
the result to the following table.
Number of red small squares Value to set Water hardness INTENZA+
1 very soft water A
2 soft water A
3 hard water B
4 very hard water C
4 Press the MENU and the OK buttons, select the menu and scroll until
selecting the water hardness. Select the preferred water hardness setting
and press the OK button in order to con rm.
ESPRESSO
ESPRESSO LUNG O
AROMA STRENGT H
ESPRESSO
ESPRESSO LUNG O
AROMA STRENGT H