INSTRUCTIONS BOOKLET
9
ENGLISH
Insert the “INTENZA +” water lter in the empty water tank and push it down to the
lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see the
“Dispensing Hot Water” chapter).
Set the “INTENZA+” water lter according to the measurements performed (see
“Measuring the water hardness”) and indicated on the base of the lter:
A = soft water – equals 1 or 2 small squares
B = hard water (standard) – equals 3 small squares
C = very hard water – equals 4 small squares
Then, ll the tank again.
1 Press the MENU and the OK buttons to conrm. Scroll until selecting the water
lter. Press the OK button.
2 Select ON, then press OK and nally exit from the menu.
Replacing the “INTENZA+” water lter
When the “INTENZA+” water lter needs to be replaced, the lter icon is displayed.
Replace the water lter by scrolling the menu until selecting the water lter as
described in the “INTENZA+ Filter Installation” chapter.
Select RESET and conrm with the OK button.
The machine is now programmed to manage a new “INTENZA+” water lter.
FILTER
OFF
ON
FILTER
OFF
ON
RESET
FILTER
4219-450-03601 MANUAL GAG. ANIMA CLASS-PREST. EN-ES-PT.indd 9 03/12/2018 15:01:26