INSTRUCTIONS BOOKLET

31
English
Meaning of the Error Codes
The list below reports the warning icons that the display can show, their
meanings and how to solve the problem. If the indicated solutions are
ineective because the display keeps on showing the error code icon
and the machine does not function correctly, please contact the Gaggia
customer service.
In case other error codes are shown, please take the machine to an au-
thorized after-sale service centre.
The contacts are listed in the guarantee brochure or on the www.gaggia.
com and www.gaggia.it websites.
Error
codes
Problem Cause Possible solution
01 The coee grinder is
clogged.
The coee outlet duct
is clogged.
Switch o the machine using the main
power button and remove the brew
group. Clean the coee outlet duct
thoroughly using the handle of the
measuring scoop or the handle of a
spoon. Switch on the appliance again.
03 - 04 A problem occurred in
the brew group.
The brew group is
dirty or it is not well
lubricated.
Switch o the machine using the main
power button. Remove the brew group
and clean it thoroughly. (refer to the
“Cleaning the Brew Group” chapter).
The brew group is not
correctly positioned.
Switch o the machine using the main
power button. Remove the brew group
and reinsert it again. Ensure the brew
group is in its right position before
inserting it. Refer to the “Reinserting the
Brew Group” chapter.
05 A problem occurred in
the water circuit.
There is air in the
water circuit.
Remove and reinsert the tank in the
machine twice. Ensure to insert the tank
correctly in the machine. Check that
space of the water tank is clean.
If you use a “INTENZA+” lter: pull
out the lter from the water tank and
shake it to remove all air from the lter.
Reinsert the "INTENZA+" lter into the
water tank.
14 The machine is over-
heated.
There may be multiple
causes.
Switch o the machine and switch it
on again after 30 minutes. Perform this
operation 2 or 3 times.