INSTRUCTIONS BOOKLET

24
English
Lubrication
In order to ensure perfect performances of the machine, it is necessary to
Lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use Number of daily prepared beverages Frequency of lubrication
Low 1-5 Every 4 months
Regular 6-10 Every 2 months
High >10 Every month
1 Switch o the appliance and unplug it.
2 Remove the brew group and rinse it using lukewarm water (see “Brew
Group Cleaning under Running Water”).
3 Spread a thin layer of lubricant around the inserting pin in the lower part
of the brew group.
4 Spread a thin layer of lubricant onto the guides on both sides (see the
gure).
5 Reinsert the brew group (see “Reinserting the Brew Group”).
You can use the tube of lubricant many times.
If the hook is still in a lower position, this means that it has not been correctly
positioned.
3 Slide the brew group along the side guides into the machine until it locks
in the right position with a click.
Warning: do not press the PUSH lever.
4 Close the maintenance door.