Application Guide

Rev. 00 OCTOBER 2009 Page / 03

GAGGIA

03 BRIEF INSTRUCTIONS

Indications Causes Solutions

Machine in rinsing phase

- wait for the machine to complete

the procedure

Wait until end of procedure

The appliance requires a

descaling cycle

Perform the descaling cycle

To enter the descaling cycle press the

aroma/pre-ground coffee key for 5

sec.

No coffee beans inside hopper After lling the coffee bean hopper, start the

cycle again

No water Fill the water tank

Service door open: Close it

If the service door is opened while product is being dispensed, the appliance stops

dispensing and starts a 30 sec. countdown before cancelling the dispensing process.

The countdown can be stopped by closing the service door and operation will resume

from its stopping point.

Turn the hot water/steam valve knob to the correct position.

If the knob is turned (open) while product is being dispensed, the appliance stops

dispensing and starts a 30 sec. countdown before cancelling the dispensing process.

The countdown can be stopped by closing the knob and operation will resume from

its stopping point.

No brew group

If the brew group is removed while product is being dispensed, the appliance stops

dispensing and starts a 30 sec. countdown before cancelling the dispensing process.

The countdown can be stopped by re-inserting the brew group and closing the

service door; operation will resume from its stopping point.

Rell circuit Turn the knob to the cup

Empty the dreg drawer

To reset the dreg counter, wait for the

icon to ash (5 sec.)

Insert dreg drawer

When the dreg counter is reset, the icon

ashes

Blinking

Cyclic blinking

Steady on