Installation Instruction

en-us Installing the appliance
8
7.3 Installing a three-wire connection
1. To facilitate serviceability and to ensure the safety of
the installation, the flexible conduit must not be short-
ened and should be routed to allow for temporary re-
moval of the oven.
1
7
2
3
6
5
4
3
8
1
Cable from home power supply
2
Red wires
3
Green or bare wire from home power supply
4
Green ground wire from oven
5
3-wire flexible conduit from oven
6
UL listed or CSA approved junction box
7
Black wires
8
UL listed or CSA approved conduit connector
2. Connect the red wire from the oven to the red electrical
supply wire (hot wire).
3. Connect the black wire from the oven to the black elec-
trical supply wire (hot wire).
4. Connect the green ground wire from the oven to the
green or bare ground electrical supply wire.
7.4 Installing a four-wire connection
Ungrounded Neutral
1. IMPORTANT: Use the four-wire cable from home power
supply in the U.S. where local codes do not allow
grounding through neutral, New Branch circuit installa-
tions (1996 NEC), mobile homes and recreational vehi-
cles, new construction and in Canada.
2. To facilitate serviceability and to ensure the safety of
the installation, the flexible conduit must not be short-
ened and should be routed to allow for temporary re-
moval of the oven.
1
4
5
8
2
6
3
7
9
1
Cable from home power supply
2
Red wires
3
Green or bare wire from home power supply
4
Green ground wire from oven
5
3-wire flexible conduit from oven
6
UL listed or CSA approved junction box
7
Black wires
8
White wire
9
UL listed or CSA approved conduit connector
3. Connect the red wire from the oven to the red electrical
supply wire (hot wire).
4. Connect the black wire from the oven to the black elec-
trical supply wire (hot wire).
5. Connect the green ground wire from the oven to the
green or bare ground electrical supply wire.
Installing the appliance
8 Installing the appliance
Installing the appliance
Follow these instructions to install your appliance in the
cabinet.
8.1 Installing the appliance in a tall cabinet
1. Remove the transport brackets for the inlet and drain
hose.
2. When installing 2appliances next to each other, align
both handles to the center.