Use and Care Manual

Troubleshooting en-us

--------

Power cut

Your appliance can bridge a power cut of a few seconds.

Operation continues.

If the power cut was for a longer period and the

appliance was in operation, a message appears in the

display. Operation is interrupted.

Set the function selector to 0, then the appliance can be

operated again as usual.

Demo mode

The demo mode is activated if the ° symbol appears in

the display. The appliance does not heat up.

Briefly disconnect the appliance from the mains (switch

off the domestic fuse or the circuit-breaker in the fuse

box). Then deactivate the demo mode within 3 minutes in

the factory setting.~ "Basic settings" on page 37

Error message "Exxx" If an error message appears, turn the

program selection to 0; if the display

goes off, it was a one-time problem. If the

problem occurs repeatedly or if the dis-

play stops, please contact after-sales

service and inform them of the error

code.

Water drips out when you open the

appliance door

The collecting channel on the under-

side of the door panel is full

Dry the collecting channel with a sponge