Use & Care Manual

24
en-us Personal recipes
Ž Personal recipes
Personal recipes You can save up to 50 individual recipes. You can record
a recipe. You can assign these recipes a name so that
you can fall back on them quickly and conveniently if you
need them.
Recording a recipe
It is possible to set up to 5 phases consecutively while
recording at the same time.
1. Set the function selector to ž.
2. Touch the i symbol.
3. Use the rotary selector to select "Individual recipes"
and press ™ to confirm.
4. Use the rotary selector to select a free memory
location.
5. Touch the g symbol.
6. Set the desired temperature with the rotary selector.
7. The cooking time is recorded.
8. Recording another phase:
Set the program selection to the required heating
function. Set the required temperature with the rotary
selector. A new phase begins.
9. Once the appliance has achieved the desired cooking
result, touch the & symbol to end the recipe.
10. Enter the name under "ABC". ~ "Entering a name"
on page 25
Notes
▯ Recording a phase does not begin until the appliance
has reached the set temperature.
▯ Every phase must last at least one minute.
▯ During the first minute you can change the heating
function or the temperature.
Enter the core temperature for a phase:
Insert the core temperature probe in the socket in the
oven interior. Set the heating function and temperature.
Touch the + symbol. With the rotary selector, enter the
required temperature and confirm it with +.
Programming a recipe
You have the option of programming and saving up to five
phases of preparation.
1. Set the function selector to ž.
2. Touch the i symbol.
3. Use the rotary selector to select "Individual recipes"
and press ™ to confirm.
4. Choose a free storage location with the rotary
selector.
5. Touch the % symbol.
6. Enter the name under "ABC". ~ "Entering a name"
on page 25
7. Choose the first phase with the C symbol.
The heating function and temperature set at the start
are displayed. You can change the heating function
and temperature with the rotary selectors.
8. Choose the time setting with the C symbol.
9. Set the required cooking time with the rotary selector.
10. Choose the next phase with the C symbol.
- or -
Preparation is complete, end input.
11. Save with ™.
- or -
Cancel with ' and quit the menu.
Enter the core temperature for a phase:
Choose the next phase with the C symbol. Set the
heating function and temperature. Touch the + symbol.
With the rotary selector, enter the required temperature
and confirm it with +.
Note: For phases for which a core temerature has been
programmed you cannot set a cook time.

)

)