Use and Care Manual

27
Core temperature probe en-us
Inserting the core temperature probe
into the food
Insert the core temperature probe into the food before
you place the food in the oven cavity.
The core temperature probe has three measuring points.
Insert the core temperature probe as far as possible.
Ensure that the middle measuring point is inserted in the
food. It must not be inserted in the fat or be touching the
ovenware or bones.
Meat: For large pieces of meat, insert the core
temperature probe at an angle from above as far as it will
go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
If there is more than one piece of meat, insert the core
temperature probe into the middle of the thickest piece.
Poultry: Insert the core temperature probe as far as it will
go into the thickest point in the breast. Depending on its
structure, insert the core temperature probe into the
poultry crossways or lengthways. With poultry, make sure
that the tip of the core temperature probe does not
protrude into the cavity in the middle of the bird.
Fish: Insert the core temperature probe behind the head
as far as it will go towards the spine. Place the whole fish
onto the wire rack and prop it up in the swimming
position using half a potato.
Turning the food: If you want to turn the food, do not
remove the core temperature probe. Once you have
turned the food, check that the core temperature probe is
correctly positioned in the food.
If you remove the core temperature probe during
operation of the appliance, all settings are reset and you
have to apply them again.
Setting the core temperature
9 CAUTION
Damage to the core temperature probe:
The core temperature probe may be damaged if the
distance between the grill heating element and the
core temperature probe is too small. Make sure
that the distance between the grill heating element
and the core temperature probe or the cable of the
core temperature probe is a few centimeters. The
meat may expand during the cooking process.
9 CAUTION
Damage to the core temperature probe:
Do not trap the cable of the core temperature
probe in the appliance door.
1. Insert the food to cook in the cooking compartment
with a core temperature probe inserted. Insert the
core temperature probe into the socket in the top right
of the cooking compartment and close the appliance
door.
2. Turn the function selector to the desired heating type.
3. Use the rotary selector to set the cooking
compartment temperature.
4. Touch the + symbol. Use the rotary selector to
change the set core temperature for the food and
confirm with +.
The core temperature set must be higher than the
current core temperature.