Manual

17
3 Start with I.
The Timer menu closes and the timer starts to run.
The symbol for the timer Š appears on the display and
the time can be seen counting down.
A signal sounds once the time has elapsed. The
audible signal ceases if you touch the ™ symbol.
You can exit the Timer menu at any time by touching
the ' symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function
with C, select Š, and touch the H symbol. To let the
timer run on, touch the I symbol.
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function
with C, select Š, and touch the Ž symbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts up from 0 seconds to 90
minutes.
It has a pause function. Therefore, you can stop the
timer in between times.
Starting the stopwatch
1 Launch the timer menu.
2 With C, select the "Stopwatch" function p.
3 Start with I.
The timer menu is closed and the time runs. The p
symbol and the elapsing timer are shown in the
display.
Stopping and restarting the stopwatch
1 Launch the timer menu.
2 With C, select the "Stopwatch" function p.
3 Touch the H symbol.
The time stops. The symbol changes to Start I
again.
4 Start with I.
The time continues to run. Once 90 minutes have been
reached, the display pulsates and a signal sounds. It
goes off when you touch the ™ symbol. The p
symbol disappears from the display. The operation has
ended.
Switching off the stopwatch:
Launch the timer menu. With C, select the
"Stopwatch" function p and touch the Ž symbol.

6WRSZDWFK


6WRSZDWFK
