Use & Care Manual
Table Of Contents
- BO 450/451 612
- Table of Contents
- Use and care manual
- IMPORTANT SAFETY INSTRUCTIONS 4
- ]Causes of damage 9
- 7Environmental protection 9
- *Familiarizing yourself with your appliance 10
- KBefore using the appliance for the first time 15
- 1Operating the appliance 16
- OTimer functions 18
- FSabbath mode and Yom Tov mode 21
- nAutomatic programs 22
- ŽPersonal recipes 24
- @Core temperature probe 26
- vRoasting function 29
- AChildproof lock 30
- oHome Connect 30
- QBasic settings 34
- DCleaning and maintenance 37
- .Pyrolysis (self-cleaning) 39
- 3Troubleshooting 41
- 4Customer service 43
- JTables and tips 44
- 9 Safety Definitions
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- 9 WARNING
- Proper Installation and Maintenance
- Fire Safety
- 9 WARNING
- 9 WARNING
- 9 WARNING
- 1. SMOTHER FLAMES with a close- fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- 2. NEVER PICK UP A FLAMING PAN – You may be burned.
- 3. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- 4. Use an extinguisher ONLY if:
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proposition 65 Warning:
- ]Causes of damage
- 7Environmental protection
- *Familiarizing yourself with your appliance
- KBefore using the appliance for the first time
- 1Operating the appliance
- OTimer functions
- FSabbath mode and Yom Tov mode
- Sabbath mode and Yom Tov mode
- Sabbath mode
- Note:
- Follow these steps:
- 2. Select "Factory setting" with the rotary selector.
- 3. Confirm by touching the ™ symbol.
- 4. Rotate the selector to Sabbath mode :.
- 5. Confirm by touching the ™ symbol.
- 6. Rotate the selector to “activate”.
- 7. Corfirm by touching the ™ symbol.
- 8. Turn the oven off.
- 2. Touch the / symbol.
- 3. Changing the cooking time 6 : Touch the $ symbol. Set the preferred cooking time with the rotary selector. You can set up to 74 hours. Confirm by touching the ™ symbol. Then changing the temperature becomes an option.
- 4. Changing the temperature: Set the required temperature with the rotary selector.
- 5. Start with I .
- Note:
- Yom Tov mode
- Setting the Yom Tov mode
- 2. Touch the / symbol.
- 2. Set the desired Stage 2 cooking time with the rotary selector.
- 3. Touch the C symbol to adjust the end of Stage 2 cooking time 5 .
- 4. Select the end time with the rotary selector.
- 5. Change the date if needed by touching the C symbol to V .
- 6. Rotate the selector to the desired date.
- 7. Confirm settings by touching the ™ symbol.
- 2. Start with I .
- nAutomatic programs
- Automatic programs
- Information on the settings
- Selecting a dish
- Applying settings for dishes
- 1. Set the function selector to ž.
- 2. Touch the i symbol. Press ™ to confirm.
- 3. Use the rotary selector to select the category and press ™ to confirm.
- 4. Use the rotary selector to select the required dish and press ™ to confirm.
- 5. Press ™ to confirm the required settings. Follow the directions on the display.
- 2. Select a single or double cooking time, depending on requirements.
- 3. Press I to start.
- 4. If the "Continue cooking" function has ended, turn the function selector to 0.
- Calling up the last automatic programs used
- ŽPersonal recipes
- Personal recipes
- Recording a recipe
- 1. Set the function selector to ž.
- 2. Touch the i symbol.
- 3. Use the rotary selector to select "Individual recipes" and press ™ to confirm.
- 4. Use the rotary selector to select a free memory location.
- 5. Touch the g symbol.
- 6. Set the desired temperature with the rotary selector.
- 7. The cooking time is recorded.
- 8. Recording another phase:
- 9. Once the appliance has achieved the desired cooking result, touch the & symbol to end the recipe.
- 10. Enter the name under "ABC". ~ "Entering a name" on page 25
- Programming a recipe
- 1. Set the function selector to ž.
- 2. Touch the i symbol.
- 3. Use the rotary selector to select "Individual recipes" and press ™ to confirm.
- 4. Choose a free storage location with the rotary selector.
- 5. Touch the % symbol.
- 6. Enter the name under "ABC". ~ "Entering a name" on page 25
- 7. Choose the first phase with the C symbol.
- 8. Choose the time setting with the C symbol.
- 9. Set the required cooking time with the rotary selector.
- 10. Choose the next phase with the C symbol.
- 11. Save with ™.
- Note:
- Entering a name
- Starting a recipe
- Change recipe
- Deleting a recipe
- @Core temperature probe
- Core temperature probe
- 9 WARNING
- 9 WARNING
- Inserting the core temperature probe into the food
- Setting the core temperature
- 9 CAUTION
- 9 CAUTION
- 2. Turn the function selector to the desired heating type.
- 3. Use the rotary selector to set the oven cavity temperature.
- 4. Touch the + symbol. Use the rotary selector to change the set core temperature for the food and confirm with +.
- 5. The appliance heats with the set heating type.
- Core temperature guidelines
- vRoasting function
- AChildproof lock
- oHome Connect
- Home Connect
- Notes
- Setting Up
- Note:
- Installing the app
- 2. Enter the search term "Home Connect".
- 3. Select the Home Connect app and install it on your mobile device.
- 4. Launch the app and set up Home Connect access.
- 2. Touch the % symbol.
- 3. Turn the rotary selector to "Wi-Fi".
- 4. Confirm by touching the ™ symbol.
- 5. Touch the ™ symbol to continue.
- 6. Turn the rotary selector to "Automatic (WPS)".
- 7. Touch the ™ symbol to start the connection process.
- 8. Press the WPS button on the router within the next 2 minutes.
- 2. Touch the % symbol.
- 3. Turn the rotary selector to "Wi-Fi".
- 4. Confirm by touching the ™ symbol.
- 5. Touch the ™ symbol to continue.
- 6. Turn the rotary selector to "Manual".
- 7. Touch the ™ symbol to start the connection process.
- 8. Follow the instructions in the app.
- 2. Use the rotary selector to select "Connect to app".
- 3. Touch the % symbol and start the connection process with ™.
- 4. Follow the instructions in the app.
- Note:
- Remote Start
- Remote Diagnostics
- Information on Data Protection
- Declaration of Conformity
- Wi-Fi® Module
- QBasic settings
- Basic settings
- 2. Select "General setting" with the rotary selector.
- 3. Touch the ™ symbol.
- 4. Set the required general setting with the rotary selector.
- 5. Touch the % symbol.
- 6. Set the general setting with the rotary selector.
- 7. Save with ™ or cancel with ' and quit the current general setting.
- 8. Turn the program selector to 0 to quit the general setting menu.
- DCleaning and maintenance
- .Pyrolysis (self-cleaning)
- Pyrolysis (self-cleaning)
- 9 WARNING
- 9 WARNING
- 9 WARNING
- 9 WARNING
- 9 WARNING
- Preparing the pyrolytic self-cleaning feature
- Starting the pyrolytic self-cleaning function
- 1. Set function selector to S.
- 2. The œ symbol is displayed. Press ™ to confirm.
- 3. The switch-off time at which the pyrolytic self-cleaning function will be finished is displayed. If desired, change the switch-off time with the rotary selector. Press ™ to confirm.
- 4. Remove all accessories from the oven cavity and remove any coarse dirt. Press ™ to confirm.
- 5. Press I to start. The cleaning time counts down on the display. If the switch-off time has been delayed, the time until the pyrolytic self-cleaning function starts counts down in the display. The light in the oven cavity remains switched off.
- Cleaning the Accessories with the Pyrolytic Self-cleaning Feature
- 3Troubleshooting
- Troubleshooting
- 9 WARNING
- --------
- Power cut
- Demo mode
- Replacing the oven lamp
- 9 WARNING
- 9 WARNING
- Note:
- Replacing the top oven lamp
- 2. Take out the halogen lamp. Insert the new halogen lamp.
- 3. Fold up and screw down the lamp cover.
- 4. Switch on the fuse in the fuse box again.
- 2. Undo the knurled screws on the slide-in rack. Remove the slide-in rack.
- 3. Press the top retaining spring to the side. Remove the glass cover.
- 4. Take out the halogen lamp. Insert the new halogen lamp.
- 5. Insert the glass cover at the bottom into the retaining spring and latch it at the top. The beveled side of the glass cover must point toward the oven.
- 6. Remove the dishcloth from the oven.
- 7. Switch on the fuse in the fuse box again.
- 4Customer service
- JTables and tips
- Use and care manual
39
Pyrolysis (self-cleaning) en-us
.
Pyrolysis (self-cleaning)
Pyrolysis (self-cleaning)
During self-clean (pyrolysis), the oven heats up to 905°F
(485°C). Thus, remainders from roasting, grilling or
baking are burnt up and all you have to do is wipe the ash
out of the interior.
Self-clean (pyrolysis) takes three hours. You can move the
self-clean switch-off time (for example, if you would like it
to run at night).
9 WARNING
During the elimination of soil during self-cleaning,
small amounts of Carbon Monoxide can be created
and the fiberglass insulation could give off very
small amounts of formaldehyde during the first
several cleaning cycles. To minimize exposure to
these substances, provide good ventilation with an
open window, or use a ventilation fan or hood.
Wipe out excessive spillage before self-cleaning the
oven.
9 WARNING
Risk of fire!
The appliance becomes very hot during pyrolytic
self-cleaning. Never hang flammable items such as
dishcloths on the door handle. Keep the front of
the appliance clear. Keep children away.
9 WARNING
Severe health risk!
The appliance becomes very hot during pyrolytic
self-cleaning. The non-stick coatings on trays and
forms are destroyed and toxic gases are produced.
Never leave trays and forms with non-stick coatings
in the oven during pyrolytic self-cleaning. Only
leave enameled accessories in oven during self-
clean cycle.
9 WARNING
Risk of burns!
The oven interior becomes very hot during pyrolytic
cleaning. Never open the appliance door or the
latching hook by hand. Allow the appliance to cool
down. Keep children away.
9 WARNING
Risk of burns!
; The appliance will become very hot on the
outside during the cleaning function. Never touch
the appliance door. Allow the appliance to cool
down. Keep children away from the appliance.
Do not clean parts or accessories in the self-clean oven.
Preparing the pyrolytic self-cleaning
feature
9 CAUTION
Risk of fire! Loose food remnants, fat and meat
juices may catch fire. Wipe the cooking
compartment with a damp cloth.
▯ Remove the worst soiling and food residues from the
oven.
▯ Clean the door seals, the inside of the door and the
glass pane by hand as these parts are not cleaned
during the pyrolytic self-cleaning cycle.
▯ Remove any loose parts from inside the cooking
compartment. The plug-in grids are pyrolysis-proof.
Make sure that nothing is left inside the cooking
compartment.
▯ Bush for the additional heating element at the back of
the cooking compartment: Make sure that the cover is
in the bush.
▯ Close the oven door.
Starting the pyrolytic self-cleaning
function
1. Set function selector to S.
2. The œ symbol is displayed. Press ™ to confirm.
3. The switch-off time at which the pyrolytic self-cleaning
function will be finished is displayed. If desired,
change the switch-off time with the rotary selector.
Press ™ to confirm.
4. Remove all accessories from the oven cavity and
remove any coarse dirt. Press ™ to confirm.
5. Press I to start. The cleaning time counts down on the
display. If the switch-off time has been delayed, the
time until the pyrolytic self-cleaning function starts
counts down in the display. The light in the oven cavity
remains switched off.










