Installation Instructions

Connect Electrical Supply

9 WARNING

Risk of electric shock

Parts inside the appliance can have sharp edges.

The connection cable can be damaged. Do not

bend or pinch connection cables during

installation.

Refer to data plate for more information. See "Service"

for data plate location.

The branch-circuit breakers ampacity, the wire sizes and

the connections must conform to the requirements of

the National Electrical Code or Canadian Electrical

Code and all local codes and ordinances.

This appliance is connection with a plug

▯ Plug has to be conform with NEMA

CONFIGURATIONS FOR PLUGS AND

RECEPTACLES.

▯ The appliance must be properly grounded.

▯ Plug must be rated not less than type 6-20 P

(2-pole 3-wire grounding).

▯ Only a qualified electrician should connect the

plug.

▯ Install a socket outlet earthed in accordance with

regulations approx. 27" (700 mm) above the floor

behind the appliance. The socket outlet must still

be accessible after installation.

Removing the appliance

1 Remove the grease filter.

2 Loosen the flue duct.

3 Disconnect the appliance from the power supply.

4 Loosen the exhaust air lines.

5 Undo the fastening screws.

6 Remove the appliance.