Installation Instructions

16
3
Extraction mode units with external remote fan unit
AR 4..:
‒ Unscrew the connecting pieces from the cover
plate in the ventilation hood.
‒ Secure the exhaust air pipe to the connecting
piece (A).
‒ Screw the connecting piece to the cover plate in
the ventilation hood.
4 Connect it to the air extractor opening (B).
5 Seal the joints appropriately.
Connecting the power supply
1 Plug the mains plug into the grounded socket.
2 If a fixed connection is required, please follow the
instructions in the Electrical Connection section.
Attaching flue duct
9 WARNING
Risk of injury
Components inside the appliance may have sharp
edges. Wear protective gloves.
1 Remove the protective film from the flue ducts.
2 Place both parts of the upper flue duct on the
appliance such that they fit together.
Model with air extraction mode
Models with air recirculation mode
3 Push the upper flue duct up and use two screws to
secure it at the top.
$5
$
%