Installation Instructions

11
Cleaning the metal grease filter
These instructions apply to several appliance
models. It is possible that individual features are
described that do not apply to your appliance.
9 WARNING
Risk of fire
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two
months.
Never operate the appliance without the
grease filter.
Notes
‒ Do not use any aggressive, acidic or alkaline
cleaning agents.
‒ When cleaning the metal grease filters, also
clean the metal grease filter holder in the
appliance with a moist cloth.
‒ You can clean the metal grease filters in a
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent if soiling
is stubborn. You can order it via the online shop.
▯ Soak the metal grease filters in hot soapy
solution.
▯ Use a brush for cleaning and then rinse the
filters well.
▯ Allow the metal grease filters to drip dry.
In the dishwasher:
Note: Slight discoloration is possible when cleaning
the grease filters in the dishwasher. This does not
affect the metal grease filter's functioning.
▯ Do not clean extremely dirty metal grease filters
with dishes.
▯ Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Uninstalling metal grease filter
1 Take metal mesh grease filter out of the holder.
2 Pull the metal grease filter downwards. While
doing this, place your other hand under the
metal grease filter.
Notes
‒ Grease can accumulate in the bottom of the
metal mesh grease filter.
‒ Do not hold metal mesh grease filter at an
angle, otherwise grease will drip out.
3 Clean the metal mesh grease filter.
Installing metal grease filter
1 Insert metal grease filter.
Simultaneously use your other hand to grasp
under the metal grease filter.
2 Flip metal grease filter up and snap the latch
into place.
Area Cleaning agent
Stainless steel Hot soapy water:
Clean with a dishcloth and then dry with
a soft cloth.
Clean stainless steel surfaces in the
grind direction only.
Special stainless steel cleaning prod-
ucts are available from customer ser-
vice or from specialist retailers. Apply a
very thin layer of the cleaning product
with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dishcloth and dry
with a soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminum and
plastic
Glass cleaner:
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating
controls
Hot soapy water:
Clean using a damp dishcloth and dry
with a soft cloth/towel.
Risk of electric shock from penetrating
moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.