Specification Sheet
AI 230 700
Stainless steel
Width 40" (100 cm)
Air extraction / Air recirculation
Standard duct cover included
Installation accessories
AD 200 326
Stainless steel duct cover extension,
Length: 3' 7 ⁵⁄₁₆" (1,100 mm).
AD 223 346
Mounting kit extension.
Length: 1' 7 ¹¹⁄₁₆" (500 mm). Must
be ordered in conjunction with the
AD200326.
AD 220 396
Stainless steel ceiling collar,
covers screws on duct cover and
uneven gaps of ceilings that are not
completely flat.
Optional accessories
AA 200 816
Air recirculation module with activated
charcoal filter installed on the inside
of the duct cover.
AA 200 110
Activated charcoal filter for AA200816
air recirculation module.
AD 223 356
Adapter for roof inclination left/right
AD 223 366
Adapter for roof inclination front/back
Good to know:
the hood has to be larger than the
cooktop(s) or it has to be as large as the
cooktop(s). Please check the require-
ments in chapter ventilation.
200 series island hood
AI 230
– Classic Gaggenau design
– Highly efficient extraction of
cooking vapors
– Low-noise blower
– Patented filter technology with
high level of grease absorption
– Rim extraction filter with flat and
easy-to-clean stainless steel
surface
– Dimmable LED light for optimum
illumination of the entire cooktop
– Air extraction or recirculation
system
– Air recirculation module with
activated charcoal filters: quiet
and highly efficient recirculation
solution with odor reduction as in
air extraction mode, and long
replacement intervals
Output
Unobstructed air flow:
490 CFM with ø 6".
Sound pressure level: 61 dBA.
Odor reduction recirculation 95%.
Features
Three electronically controlled power
levels and an intensive mode.
Grease filter saturation indicator.
Patented rim extraction filter,
dishwasher-safe.
Warm white LED light (3,600 K),
continuously dimmable.
Airflow-optimized interior for efficient
air circulation.
Easy mounting system for simple
installation and alignment.
A one-way flap comes included with
the hood.
Planning notes
The hood includes a two-part duct
cover with dimensions from 2' 1 ¾"
(654 mm) to 2' 8 ¹³⁄₁₆" (834 mm).
Individual planning solutions can be
accommodated using the optional
duct cover accessory AD200326 or
by shortening the lower edge of the
telescopic duct cover.
Minimum clearance above gas or
induction cooktops is 30".
The air recirculation module with
activated charcoal filter can be
installed on the inside of the duct
cover.
Rating
Total rating: 430 W.
Total Amps: 3 A.
120 V / 60 Hz
Connecting cable 51 ³⁄₁₆" with plug.
* Suitable for ceiling heights of 7.7 ft. (2.34 m) to 8.3 ft. (2.52 m);
Specifications refer to a distance from floor to lower duct cover edge of 5.2 ft. (1.60 m).
* Suitable for ceiling heights of 8 ft. (2.42 m) to 8.7 ft. (2.64 m);
Specifications refer to a distance from floor to lower duct cover edge of 5.2 ft. (1.60 m).
* Suitable for ceiling heights of 9.4 ft. (2.86 m) to 10.4 ft. (3.16 m);
Specifications refer to a distance from floor and lower duct cover edge of 5.2 ft. (1.60 m).
Exhaust:
*29
5
/
16
"-36
3
/
8
"
(*744-924)
* Suitable for ceiling heights of 7.7 ft (2.34 m) to 8.3 ft (2.52 m);
Specifications refer to a distance from floor
to lower chimney edge of 5.2 ft (1.60 m).
14
1
/
8
"
(358)
9
5
/
8
"
(245)
12
13
/
16
"
(326)
10
3
/
8
"
(264)
14
3
/
16
"
(360)
51
3
/
16
"
(1300)
15
3
/
16
"
(385)
25
9
/
16
" (650)
10
7
/
8
"
(277)
10
3
/
8
"
(263)
19
5
/
8
" (499)
14"
(355)
9
/
16
" (14)
18
1
/
8
"
(460)
1
13
/
16
" (46)
1
3
/
16
" (30)
39
3
/
8
"
(1000)
7
3
/
16
"
(182)
* Suitable for ceiling heights of 8 ft (2.42 m) to 8.7 ft (2.64 m);
Specifications refer to a distance from floor
to lower chimney edge of 5.2 ft (1.60 m).
1
3
/
4
" (45)
7
1
/
16
" (170)
32
7
/
16
"-41
1
/
8
"
(824-1044)
* Suitable for ceiling heights of 9.4 ft (2.86 m) to 10.4 ft (3.16 m);
Specifications refer to a distance between floor
and lower chimney edge of 5.2 ft (1.60 m).
49
3
/
4
"-61
9
/
16
"
(1264-1564)
Numbers indicated
inside parenthesis ( ) = mm
www.gaggenau.com/us
Revised: June 2021