Quick Reference Guide for Specifiers
ROOF INSULATION PRODUCTS
CASE STUDY
Amarillo Oral and Maxillofacial Surgery, Amarillo, TX
Architect: Playa Design Studio
Contractor: Tecta America CS, LLC — tectaamerica.com
Building Owner: Dr. William Graves
Job Size: 12,000 square feet Completion Date: December 2014
Amarillo Oral and Maxillofacial Surgery
provides solutions to a wide variety of
problems related to the mouth, teeth, and
facial region. The new office offers state-
of-the-art diagnostic and imaging equipment.
The building, designed by Playa Design
Studio, utilized a contemporary architecture
along with exterior lighting to attract attention.
The owner wanted to install a clean,
reflective roof that would fit the architecture
of the building and enhance it with the
“AOMS” logo, visible to air traffic above.
EnergyGuard
™
Polyiso Insulation and HD
Cover Board were mechanically attached.
The TPO system consisted of GAF
EverGuard
®
TPO 60 mil fully adhered
using EverGuard
®
SBA 1121 TPO
Bonding Adhesive. For the “AOMS”
logo, TOPCOAT
®
TPO Red Primer was
used to ensure good adhesion over the
new TPO, and TOPCOAT
®
Membrane
in blue was used to create the logo.
• Doesn’t contribute to global warming
• Meets FM Class 1 Fire Approvals
• Has the highest R-value per inch of thickness
• Is dimensionally stable
Find Roof Insulation That…
GAF EnergyGuard
™
Polyiso Roof Insulation Products
Challenge:
Solution:
Economical and exceptional thermal
performance for all types of roofing
systems
EnergyGuard
™
Polyiso Roof Insulation products are
made of organic/glass facers bonded to a core
of isocyanurate foam. It’s available in thicknesses
ranging from 1" to 4.6" and offers tapered panels.
LTTR Value
• Offers one of the highest LTTR insulation values
compared to any other type of nonpolyiso
insulation product of equivalent thickness that
meets an FM Class 1 rating*
Fire Resistance
• Meets FM 4450/4470* and ANSI/UL 790**
Class A roofing fire rating and ANSI/UL 263**
fire tests of building construction materials
Global Warming Impact
• Manufactured in state-of-the art plants using
the latest technology, with EPA-compliant
blowing agents containing no CFCs or HCFCs,
EnergyGuard
™
Polyiso Roof Insulation has zero
ozone depletion potential and no global
warming potential
For assistance designing tapered roofs, contact
the GAF Tapered Design Group at:
gaf.com/tapereddesign
20 2120
EverGuard
®
TPO Membrane
EnergyGuard
™
HD Polyiso Insulation
Drill-Tec
™
Fasteners and Plates
EnergyGuard
™
Polyiso Insulation
EnergyGuard
™
Polyiso Flute Filler
Structural Steel Deck
Typical mechanically attached EverGuard
®
TPO
Smooth Membrane over metal panel deck using
EnergyGuard
™
Polyiso Insulation Flute Filler and
HD Polyiso Insulation, which can be used as a
cover board.
LAYERED
SYSTEM
*Refer to www.FMapprovals.com/RoofNav for actual FM Approved assemblies.
** Refer to UL Online Certication Directory for actual assemblies.