SDS

GAF SDS # 2225
Page 4 of 8
RECOMMENDED FIRE FIGHTING
PROCEDURES:
Treat as fuel oil fire. Self-contained breathing apparatus
recommended with full turn-out gear. Use water spray or fog
for cooling exposed containers. Exercise caution when fighting
any chemical fire. Prevent firefighting water from entering the
environment.
UNUSUAL FIRE & EXPLOSION
HAZARDS:
COMBUSTIBLE. Keep away from open flame and sources
and heat.
SECTION 6: ACCIDENTAL RELEASE MEASURES
ACCIDENTAL RELEASE MEASURES:
Dike spill area; add absorbent to liquid. Keep out of sewers and
waterways. No flames, no sparks. Eliminate all sources of ignition.
Ventilate area if necessary.
SECTION 7: HANDLING AND STORAGE
HANDLING AND STORAGE:
Keep away from sources of ignition; open flame. This material is
for exterior use only. Store at less than 110 deg F. Wash hands
and other exposed areas with mild soap and water before eating,
drinking or smoking and when leaving work. Provide good
ventilation in process area to prevent formation of vapor. Obtain
special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all
ignition sources if safe to do so. Do not breathe fume, spray, and
vapors.
OTHER PRECAUTIONS:
Practice good personal hygiene. Launder contaminated clothing
before reuse. Use control protection such as chemical splash
proof goggles, oil resistant gloves, barrier cream. Clean tools
and equipment with kerosene.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS /
VENTILATION:
Local exhaust.
RESPIRATORY PROTECTION:
Normally not needed. If TLV is exceeded, use NIOSH approved
respirator.
EYE PROTECTION:
Chemical splash goggles or safety glasses and face shield.
SKIN PROTECTION:
Impervious work clothing is recommended.
OTHER PROTECTIVE EQUIPMENT:
Oil resistant gloves recommended.