Specification

2/2/2015
APPLICABLE STANDARDS & PROTOCOLS
 UL 790, Class A
 Dade County Approved 13-1104.01
 Florida Building Code Approved FL10124-R12
 UL 997 modified to 110 mph
 ASTM D7158, Class H
 ASTM D3161, Class F
 ASTM D3018, Type 1
 ASTM D3462
 ICC Evaluation Services ESR-1475
 ICC Evaluation Services ESR-3267***
 Texas Department of Insurance
 CSA A123.5-98
Effective 7/1/08, existing NYC MEA's may be used but are no longer required.
***Obtained ESR 3267 evaluation from ICC Evaluation Services based on compliance with the requirements of AC438, an acceptance
criteria established by ICC Evaluation Services to evaluate asphalt shingles that contains performance tests in addition to those required by
the building code. (ICC Evaluation Services provides technical evaluations of building products that directly address the issue of code
compliance. Building inspectors use these evaluation reports to help determine code compliance and enforce building regulations.)
PRODUCT/SYSTEM SPECIFICS
***
 Fiberglass Asphalt Construction
 Dimensions (approx): 17” x 34 ½”
 Exposure: 7.5”
 Bundles/Square: 7
 Pieces/Square: 56
 Nails/Square: 280 (336 where 6 nails per shingle is required)
††
 StainGuard
®
Protection: Yes
 Hip/Ridge: Timbertex
®
 Starter: WeatherBlocker™
***
Refer to complete application instructions.
††
required by some local codes and required for enhanced wind coverage on certain products.
INSTALLATION
Detailed instructions are provided on the inside of each bundle wrapper of Camelot
®
shingles. Application sheets may
also be obtained at www.gaf.com.