User Manual

XScopes
User’s Manual
DS-XScopes-3.5 – December, 2014 Page | 2
About this manual
This manual targets both novice and advanced users, providing a full resource for everyone. However, for a full
understanding of the operation of the XScopes, the user should be familiar with the operation of a regular oscilloscope.
The features documented in this manual are for units with firmware version 2.40+.
Conventions
XScope: Xprotolab, Xminilab, Xprotolab Portable or Xminilab Portable.
Portables: Xprotolab Portable or Xminilab Portable
CH1: Analog Channel 1
CH2: Analog Channel 2
CHD: Logic Inputs
Fast Sampling: 10ms/div or faster time base
Slow Sampling: 20ms/div or slower time base
Helpful tip Warning
Technical Detail
Manual Revision History
Version Date Notes
3.0 December 2013 Updated protocol interface information
3.1 February 2014 Minor error corrections
3.2 May 2014 Firmware update on Linux
3.3 October 2014 Updated interface protocol
3.4 November 2014 Counter mode
3.5 December 2014 New Sniffer ASCII mode