User Manual

10
STEP 3:
Installing Mount
Directly On Wall
• After confirming height
positioning is appropriate
by marking wall with a
pencil, hold wall mount
firmly against wall and
use pencil to mark exact
location of drill holes,
using built-in leveler
to ensure a proper
balance; then remove
wall mount and pre-drill
holes (see sidebar for
specific mounting details
regarding sheetrock and
concrete walls).
• To ensure wall mount
is not being installed
upside down, verify that
edges slope inwards and
become narrower at the
bottom; curved metal
arch found at bottom of
wall mount should face
outwards.
• Hold wall mount securely
and begin inserting
screws into appropriate
pre-drilled holes; be
sure to use appropriate
anchors or washers with
proper screws.
Installation Instructions