FPC-65 / FLAT PANEL TV CART for 32 – 65 in.
Thank you for choosing Gabor. The Gabor FPC-65 Flat-Panel TV Cart is the modern rolling A/V table. Wheel your 65-inch monitor, laptop, and webcam from room to room, whether it’s at the office, on the sales floor, or in school. If you have safety concerns about installing this product, contact a qualified professional or installation contractor. If this product is missing hardware or there are defective parts, visit www.madebygabor.com or call Customer Service at 212-594-2353.
Safety Warnings • Do not use this product for any flat-panel screen device other than what it is intended for; the exact specifications, size parameters, and weight limits are found both on the product box and in the instruction manual.
Product Specifications Compatible flat-panel display size: 32 to 65 in. (81.28 to 165.1 cm) 23.5 in. (59.7 cm) 28.2 in. (71.6 cm) Max height: 60.24 in. (153 cm) Min height: 40.56 in. (103 cm) Max weight capacity: 100 lb. (45.4 kg) Weight: 41.5 lb. (19 kg) 17.9 in. (45.5 cm) VESA mounting pattern: 100 × 100 to 600 × 400 mm 33.3 in. (84.5 cm) Material: Steel A/V shelf size: 17.94 × 11.88 in. (45.57 × 30.18 cm) 4 12.7 in. (32.2 cm) 40.5 to 60.2 in. (103 to 153 cm) Max 40.5 in.
Parts List Required tool: Phillips screwdriver 17x8.
Installing the Casters Lock the casters during installation and cart assembly.
Attaching the Riser Post Step 1 Make sure the cable-management holes are facing the rear of the base.
Adjusting the Riser Height Right riser Left riser Posts Locking screw Spring pin Step 1 You will need to remove the locking screw before extending the riser posts.
A/V Shelf Assembly and Installation Step 1 Step 2 Step 4 Step 3 9
Installing the Display Mount 10
Installing the Display/TV Bracket Selecting the Right VESA Mounting Hardware for Your Display A variety of screws are included to fit VESA standards on the back of most displays. Select the appropriate M5, M6, or M8 screws and washers. Hand-thread the screws to determine the correct diameter. (E1) D1 (A1,B1,C1) If the screw is too short, it may not hold the display. If it’s too long, it may damage the display.
Mounting the TV to the Display Mount Step 1 Step 3 12
Camera Tray Attachment Step 1 Step 2 Step 3 Step 4 Step 5 13
Installing Power and A/V Cables Step 1 Step 2 14
FIVE-YEAR LIMITED WARRANTY This GABOR product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of five (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
WWW.MADEBYGABOR.
