User's Guide

Dexcom G6 System User Guide
101
Chapter 7: Calibrate
If you didn’t enter the sensor code, the red circle on the Calibrate icon reminds you to
calibrate once every 24 hours.
When notified to calibrate:
Tap Calibrate.
Repeat steps 1-5
Receiver: Calibration
If you didn’t enter a sensor code, either tap the calibration icon or go to Menu >
Calibrations.
If you entered a sensor code, there is no Calibration icon. If you choose to calibrate,
go to Menu > Calibration to calibrate.
Receiver: Calibration
Thoroughly wash and dry your hands with
soap and water, not gel cleaners.





STEP
1
of 9
LBL014003 Rev XXX Artwork, G6 CGM System User Guide US.indd 101 2/5/19 9:26 AM