User's Guide

 15
Linking to TUs
Infrared
port
The TU uses an infrared link via the docking station to
communicate with the Installation Tool or a PDA running EMMO.
(See the EMMO User Guide).
Remember to point the tool or PDA at the infrared port on the
front of the docking station.
If you press the GET STATUS button while pointing the
tting tool at the dock, the tting tool will return the dock’s
status.
To get the TU’s status, lift the TU from the dock and point the
tting tool at the infrared port on the bottom of the TU.
(See
Get TU Status on page 16).
TU
DOCK
Installation
Tool