User Manual

ELECTRICAL SPECIFICATIONS:
Frequency Range : See Table 1
Pass band Gain @ min attenuation : See Table 2
Variable Step Attenuator Range : 0-30 dB
(2-dB steps)
Pass band Ripple : ±1.5 dB typical
Nominal Channel Bandwidth : 22 MHz typical
Noise Figure @+25
°C at max gain : 3.0 dB max.
3rd Order Intercept point : See Table 2
Output Power @ 1dB Compression : See Table 2
Isolation between Up/Down Link : 80 dB min., 90 typical.
Input/ Output Impedance : 50 Ohms
VSWR (Input/Output) : 1.5: 1 max
Power Supply (Local) : 15VDC/1.67 Amp
: (24VDC/1.88 Amp 1 & 2Watt Model)
Page 5