User Manual

RF EXPOSURE WARNING
The antenna used for this transmitter must be fixed-mounted on outdoor permanent
structures. In order to satisfy the FCC RF exposure requirements, the BDA/antenna
installation must comply with the following:
The downlink outdoor antenna (Yagi type or similar directional antenna) must be
installed so as to provide a minimum separation distance of 0.35 meters (35 cm)
between the antenna and persons within the area. (This assumes a typical antenna
with maximum gain of [5 dBi, VSWR >?> 1.5:1, Zo= 50 ohms, and a cable
attenuation of between 1-10 dB)
The uplink outdoor antenna (Yagi type or similar directional antenna) must be
installed so as to provide a minimum separation distance of 0.35 meters (35 cm)
between the antenna and persons within the area. (This assumes a typical antenna
with maximum gain of [15 dBi, VSWR >?> 1.5:1, Zo= 50 ohms, and a cable
attenuation of between 1-10 dB).
Page 10