User's Manual

8 | P a ge


AVAILABLE,OPTIONALFEATURES

Thefollowingoptionsareavailable,(pleasereviewthespecificationprovidedwiththeunit,toverify
thefeaturesincludedinyourBDA)
 VisualAlarms

AllG‐Wavesystemsincludelocalvisualalarmsasastandard.Local
visualalarmsareLEDlightslocatedin theunitthatindicatevarious
failures.Foralistofcorrespondingalarms,pleaseseeVariable
GainAd
justmentandLEDIndicators.


DC28 
PoweredDCOnly@+28VDC

 ACSP

ACSurgeProtectionandDCLineConditioning(Requir edifpoweredbygenerator)

 RM9
9‐Pinconnectortoenableremotealarmingviadrycontact.Alarmsinclude:UplinkAmplifierFailure,
DownlinkAmplifierFailure, UplinkALC,DownlinkALC.



ALARM CONDITIONS
Thealarmmonitorsthecurrentofboththeuplinkanddownlinkamplifiers.Analarmconditionwill
occurifeithertheuplinkordownlinkamplifiersareoverorunderitscurrenttolerance.

Additionally,eachfailure/alarm/indicatorfromtheavailablefeaturesmaybe monitoredviaan
audiblealarmdrycontactconnector,3 contactspereachalarm.ThefollowingdiagramshowsaNon
Alarmcondition.Ifanalarmoccursthetriggerwillswitchthepositionoftherelay,ashortwillbe
betweenCOMandN.C.


( Relay Shown in Non-Alarm