User's Manual

7 | P a ge


MECHANICALSPECIFICATIONS:

Size :10x6.2x3.0inch

RFConnectors :N‐typeFemale

Weight :4.6Lbs.approx.

**Note:Mayvaryperunit,seespecformoreaccurateinformationspecifictoyourSKU



ENVIRONMENTALCONDITIONS
Theunitisdesignedforindoorapplications:

Operatingtemperature:‐30Cto+55C
Storagetemperature:‐50Cto+90C 

StandardIndoorBDA’saredesignedtooperateinanindoorenvironment,
withintypicaloperatingtemperaturerangeof‐30
Cto+55C,withnormal
airflowonheatdissipationsurfacesofthesystems.TheACpowersupply
shouldbeconditionedfornormalindoorapplianceapplications.

StandardIndoorBDA’sareNOTdesignedforoutdoorapplicationswheretheambient
temperatureisoutsidetherecommendedrangeorinsideanadditionalenclosure.This
willpreventnormalairflowonheatdissipationsurfacesofthesystems,damaging
AmplifiersandtheMainPowerSupply.

StandardIndoorBDA’sareNOTdesignedfortheusewithunstablepowersources,i.e.:
generators.Shouldtheseunitsfailduetoconditionsnotwithinspecifiedparameters,the
warrantywillvoid.

G‐WavemaysupplyBDA’swithadditionalprotectiondesignedforoutdoorapplications
uponrequest