User Manual

MECHANICAL SPECIFICATIONS
:
Size : 8.75 x 6.20 x 3.0 inch
: (222.3 x 157.5 x 76.2 mm)
RF Connectors : N-type Female
Weight : 2.0 Lbs. (4.4 kg.) approx.
ENVIRONMENTAL CONDITIONS:
The unit is designed for indoor applications:
Operating temperature: - 20°C to + 50°C
Storage temperature: - 50°C to + 90°C
Mini-BDA CONNECTIONS
The Mini-BDA is powered by a +15 VDC/1.67 Amp Wall Plug-In AC adapter with a
2.5 mm output connector. The Wall Plug-In power adapter is highly reliable and
compact, designed for use in telecommunications. The power adapter is CE and UL
approved. The metal enclosure of the Mini-BDA is connected to ground.
A 9-pin D-Sub connector provides failure alarm output contacts.
The RF connections are made via two type “N” female connectors. The RF connector
labeled “BASE” must be connected to the antenna pointing towards the base station.
The RF connection labeled “MOBILE” must be connected to the antenna facing the
area to be covered by the Mini-BDA.
The RF connections must be made through cables with characteristic impedance of
50 ohms.
The isolation between the base station antenna and the mobile antenna should
be at least 12 dB higher than the Mini-BDA gain
. Isolation less than this value
can cause gain ripple across the band. Isolation equal to or less than the Mini-
BDA gain will give rise to oscillations which will saturate the amplifiers and
possibly cause damage to the Mini-BDA.
Page 7