User's Manual

Page | 6
MECHANICAL SPECIFICATIONS:
Size : 18.1 x 14.0 x 6.7 inch
: (459.74 x 355.60 x 170.18 mm)
RF Connectors
: N-Type Female
Weight
: 35.0 Lbs. (16 kg.) approx.
ENVIRONMENTAL CONDITIONS:
The unit is designed for indoor applications:
Operating temperature: - 20°C to + 50°C
Storage temperature: - 50°C to + 90°C
FCC NOTE:
The Federal Communications Commission (FCC) has tested this product and found it to
comply with their RF Exposure Requirements, pursuant to FCC Part 27.
RF EXPOSURE WARNING:
In order to comply with the FCC RF exposure requirements, the BDA-LTE/UC-33/33-90-C
antenna installation must comply with the following:
The outdoor antenna (Yagi type or similar directional antenna if off air donor signal used) must
be installed so as to provide a minimum separation distance of 0.3 meters (60 cm) between
the antenna and persons within the area. (This assumes a typical antenna with gain of [10.1
dBi, VSWR ≤ 1.5:1, Zo= 50 ohms, and a cable attenuation between 1-10 dB).
The indoor antenna (Omni directional or leaky cable) must be installed so as to provide a
minimum separation distance of at least 8 inches (20 cm) between the indoor antenna
connected to the RF booster and the human user’s body within the area. (This assumes a
typical wide-beam type antenna with gain of 0-2 dBi, VSWR ≤ 2:1, Zo= 50 ohms, and a cable
attenuation of between 1-10 dB).