User Manual
Table Of Contents
- SAFETY OPERATION INSTRUCTIONS
- OVERVIEW
- FCC NOTE
- IC NOTE
- NOTE
- ANTENA INSTALLATION NOTE
- RF EXPOSURE WARNING-FCC
- RF EXPOSURE WARNING- INDUSTRY CANADA
- ELECTRICAL SPECIFICATIONS
- MECHANICAL SPECIFICATIONS
- ENVIRONMENTAL CONDITIONS
- MECHANICAL OUTLINE
- CONNECTIONS
- AVAILABLE, OPTIONAL FEATURES
- ALARM CONDITIONS
- VARIABLE GAIN ADJUSTMENT AND LED INDICATORS
- INSTALLATION
- OPERATION
- DIAGNOSTICS GUIDE
- APPENDIX 1
- APPENDIX 2
6 | Page
ELECTRICAL SPECIFICATIONS
Down-Link Frequency Range
2110 - 2155 MHz
Up-Link Frequency Range
1710 - 1755 MHz
Gain
Downlink
Uplink
65 dB (Min.) 70 dB (Typ.)
50 dB (Min.) 55 (Typ.)
Gain Flatness
± 1.5 (Max.)
Manual Attenuation Range
0-30 in 2 dB steps
Noise Figure
5.5 dB (Max.)
Power Output @ 1dB Compression
Uplink
Downlink
+19.0 (Typ.)
+55.0 (Typ.)
ALC Set-Point
Uplink
Downlink
+5.0 dBm ±1
+44 dBm ±1
3
rd
Order Output Intercept Point
@ 2 tones 0 dBm each - Uplink
+30.0 dBm
ACLR
@ 44 dBm RBW = 30 kHz
@ 1 WCDMA Signal, test Mode 1
64 DPCH, PAV=7.5 db @ 0.01%
Probability on CCDF
DL : -45 dab (Max.) @ ± 5 MHz
UL: -53 dab (Max.) @ ±10 MHz
Power Supply
110V/2.5 A, 220V/1.25 A
Propagation Delay
<0.25
Input/output Impedance
50 ohm
VSWR IN/OUT
<1.5:1
MECHANICAL SPECIFICATIONS
Size
19” x 15” x 5.2”
RF
Connectors
N-Type Female
Weight
17.8 kg / 39.6 Lb.
ENVIRONMENTAL CONDITIONS
The unit is designed for indoor applications:
Operating temperature: - 20°C to +55°C
Storage temperature: - 40°C to +85°C