User's Manual

PWG-600 User Guide
- 7 -
• Call: Press this key to dial a phone number. Enter the number first, and
then press the Accept key to dial the phone number.
• Call log: From the desktop, press this key to view the dialed call log.
Reject key: This key has two functions.
• Reject: Press this key to reject an incoming call.
• Terminate: Press this key to terminate an active call.
Reset Key: When the reset key is pressed, the parameters that are not saved in
Flash get erased. The reset key is shown in the following page.
Key: Press this key two times successively to enter the character ‘+’.
Key: Press the numeric key ‘1’ to enter a ‘.’ and a ‘:’. The first press displays
‘.’. Two successive presses display ‘:’.
Volume increase key:
• Increases the audio volume if pressed while a call is in progress.
• Increases the ring tone volume if pressed during the reception of an
incoming call while the incoming call alert is heard.
• Enters the USB download mode: Press the volume decrease key before
you turn on PWG-600, and then press the reset key. The phone enters the
USB download mode.
Volume decrease key:
• Decreases the audio volume if pressed while a call is in progress.
• Decreases the ring tone volume if pressed during the reception of an
incoming call while the incoming call alert is heard.
• Enters the USB download mode: Press the volume decrease key before
you turn on PWG-600, and then press the reset key. The phone enters the
USB download mode.
NOTE: The volume keys are also used to make an emergency call. To read
how to make emergency calls, please see “Error! Reference source not
found.”.