User's Manual

PWG-600 User Guide
- 59 -
connect through a local area network (LAN)” and click ‘Next’.
• Select “I connect through a phone line and a modem” and click ‘Next’. If
you have more than one Modem installed, a screen titled “Choose
Modem” is displayed.
• Select the Standard 33600bps Modem installed on the USB COM port and
click ‘Next’.
• The telephone number to use is “*99#“. Don’t select the “Use area code
and dialing rules”. Click ‘Next’.
• Enter the PWG-600 Mobile number in the username field and click on OK.
You will be asked about the password. The password field can be left
blank. If the password is left blank, it will ask to confirm. Click on ‘Yes’.
Then click ‘Finish’.
• Enter a name for the new connection to save your settings and click
‘Next’.
• A message “Do you want to set up an Internet mail account now?” is
displayed after you click ‘Next’. Click ‘Yes’ if you wish to set up the Internet
mail account. Click “No” if you wish to set up the Internet account later.
Click ‘Next’ and then click ‘Finish’.
In case of Windows XP follow the steps below.
• Click the “Network Connections” icon. A screen titled “Network
Connections” is displayed.
• Click on the “Create a new connection” in the Network Tasks. A
network connection Wizard guides you in setting up a new connection.
Click “Next”. Select “Connect to the Internet” and click “Next”.
• Select “Set up my connection manually” and click “Next”.
• Select “Connect using dial-up modem” and click “Next”. If you have
more than one Modem installed, a screen titled “Select a Device” is
displayed.
• Select the Standard 33600bps Modem installed on the USB COM port
and click ‘Next’.
• Enter a name for the new connection to save your settings and click
“Next”.
• Enter the number “*99#”.
• Enter the PWG-600 Mobile number in the username field and click on
OK. You will be asked about the password. The password field can be
left blank. If the password is left blank, it will ask to confirm. Click on
“Yes”. Then click “Finish”.
When you want to browse the internet, click “Start”, point to “Settings”, and select
“Control Panel”. A screen titled “Control Panel” is displayed when you select
“Control Panel”. Click the “Network and Dial-up Connections” icon. A screen titled
“Network and Dial-up Connections” is displayed. Click the connection that you
created.