User's Manual

PWG-600 User Guide
- 58 -
Browsing the Internet with a PC
You can use PWG-600 to browse the Internet, check e-mails using WiFi network
or using GPRS network.
If WiFi is available, then browsing takes place through the WiFi network. If WiFi is
unavailable, GPRS network is automatically selected for browsing.
• Connect the PWG-600 to the PC through the USB cable.
• A USB COM port is created. To find the COM port,
o Click “Start”, point to “Settings”, and select “Control Panel”. A
screen titled “Control Panel” is displayed when you select “Control
Panel”.
o Double-click the “System” icon. A screen titled “System” is
displayed.
o Click the “Hardware” tab and click the ‘Device Manager’ button. A
screen titled “Device Manager” is displayed when you select
‘Device Manager’.
o Expand the column named “Ports”. The port with the caption “WIM
Comm Port” is the USB COM port. Please memorize this COM
port.
• Click “Start”, point to “Settings”, and select “Control Panel”. A screen titled
“Control Panel” is displayed when you select “Control Panel”.
• Click the “Phone and Modem Options” icon. A screen titled “Phone and
Modem Options” is displayed.
• Click the “Modems” tab.
• Click “Add”.
• Select “Don’t detect my modem; I will select it from a list” and click ‘Next’.
A screen titled “Install New Modem” is displayed.
• Select “Standard 33600bps Modem” and click ‘Next’.
• Select the USB COM port, which is got in “step d” and click ‘Next’.
• Click Finish.
• If a message “Digital signature not found. Do you want to continue with the
installation?” appears, click ‘Yes’ and then click ‘Finish’.
• This completes the installion of the Modem on the USB COM port.
• To set up a new Dial-up connection, click “Start”, point to “Settings”, and
select “Control Panel”. A screen titled “Control Panel” is displayed when
you select “Control Panel”.
In case of Windows 2000 follow the steps below.
• Click the “Network and Dial-up Connections” icon. A screen titled “Network
and Dial-up Connections” is displayed.
• Double-click the “Make New Connection” icon. A network connection
Wizard guides you in setting up a new connection. Click ‘Next’.
• Select “Dial-up to the Internet” and click ‘Next’.
• Select “I want to setup my Internet connection manually, or I want to