User's Manual

PWG-600 User Guide
- 51 -
shown.
 Incoming: Bars all incoming call when this option
is set to “On”
 Outgoing: Bars all outgoing call when this option
is set to “On”
• Caller ID: When set to “On” it shows the caller phone
number.
• DTMF: DTMF is short for “Dual Tone Multi Frequency”.
Select DTMF and press “Select” key. The following
submenus are displayed.
 Inband: Select “Inband” if the person you are
calling supports PSTN network only.
 Outband: Select “Outband” if the person you are
calling linked to a VoIP server.
• Prefix Dial: Enable or disable prefix dialing using this option.
A prefix dial number can be set after prefix dialing is
enabled.
c. Profiles: Ten default profiles are provided. Default0~Default9.
Select a default profile and press the “Select” key. The following
options are displayed.
• Default0~Default9:
o User Number: Sets the phone number of the VoIP
extention and may be use for authentication purposes
with the VoIP Server.
o Authentication Name: Sets the authentication name for
authentication purposes with the VoIP Server.
o Password: Sets the password for authentication
purposes with the VoIP Server.
o Registrar: Sets the VoIP Server Registrar address
o Domain Name: Sets the VoIP Server Domain name
address
o Outbound Proxy: Sets the VoIP Server outbound proxy
address
o Mail Addr: Sets the VoIP Server mail address
o Edit Profile Name: Select this option to assign a user-
friendly name to the profile.
o Activate: Select “Activate” and press the “Select” key if
you want to make the selected profile active.
o Restore Defaults: Select this option to restore the
original settings for the selected VoIP profile.