User's Manual

PWG-600 User Guide
- 50 -
information on setting up the PWG-600 device on your network.
o A total of three WiFi profiles are available with the profile
name default and can be set. The settings are discussed in
“Setting WiFi parameters”
o Edit Profile Name: Select “Edit Profile Name” to change the
profile name.
o Activate: Select “Activate” to activate a “Default” profile.
Setting VoIP profiles
You can set parameters for using the VoIP profile using this option.
1. From the desktop, press the “Menu” key and using the navigational keys
select “Settings” and press the “Select” key.
2. Select “VoIP Settings” and press the “Select” key. The following
submenus appear when you select “VoIP Settings”.
a. General: Selecting this option displays the following submenus:
• VoIP On/Off: Turns VoIP On or Off
• Stun Server: Enter the address of the STUN server
• Speaker Volume: Select “Speaker Volume” and press the
“Select” key. Select a volume level and press the “Select”
key. Ten volume levels are provided ranging from Level 1 to
Level 10. Select a speaker volume level and press the
“Select” key.
• MIC Volume: Select “Microphone Volume” and press the
“Select” key. Ten volume levels are provided ranging from
Level 1 to Level 10. Select a microphone volume level and
press the “Select” key.
• Preferred Codec: The following codecs are available.
 GSM
 a Law
 μ Law
 G726
 G729
 G723.1
Select a codec and press the “Select” key.
b. Call Control: Selecting this option displays the following
submenus:
i. Call Waiting: Select “Call waiting” if you want to activate call
waiting while another call is in progress. The following
options are displayed:
 On: Select ‘On’ to enable call waiting.
 Off: Select ‘Off’ to disable call waiting.
• Call Forward: To read how to activate call forward, please
see “Error! Reference source not found.” section.
• Call Barring: Select Call Barring and two options will be