User's Manual

PWG-600 User Guide
- 49 -
o Transfer Rate: Select this option and select
the desired data transfer rate.
 Auto
 1 Mbps
 2 Mbps
 5.5 Mbps
 11 Mbps
o Use DHCP (Dynamic Host Configuration
Protocol): Select this option and then select
“Yes” to set the PWG-600 to operate using
server assigned IP (Internet Protocol) address
OR;
o Select “No” to manually fixed assignment of IP
address for this device on the network. If this
option is selected, a list of options will be
displayed:
 IP Addr (Address): Select this option
and key in the desired IP address for
this device on the network.
 Subnet Mask: Select this option and
key in the desired subnet mask for this
device on the network.
Note: A typical class C network will have
a default “255.255.255.0” as the subnet
mask.
 Default GTWY (Gateway): Select this
option and key in the desired gateway.
Note: A gateway is typically a device on
the network that has the key or access
to the internet.
 Primary DNS (Domain Name Server):
Select this option and key in the desired
primary domain name server.
 Alternate DNS: Select this option and
key in the desired alternate domain
name server.
Note: All devices connected to the IP network
requires a uniquely identified IP address to
registers itself onto the network.
Note: Please consult your network administrator for more